Showing posts with label Clean Link News. Show all posts
Showing posts with label Clean Link News. Show all posts

Monday, February 10, 2014

Five Cleaning Activities That Impact Health And Safety

This article was originally published in Clean Link.

Improving the health and safety of the public is one of the primary missions in custodial operations. This recent article on Clean Link identifies the top five activities cleaning workers can do to impact health and safety of the public. 

1. Train and re-train Hygiene Specialists (custodial workers) that their role is not cleaning for appearance sake, but for health’s sake. Workers should be trained on the science of cleaning and disinfecting.

They should understand that the custodial department performs both the clinical function of removing and inactivating/killing pathogens that could cause a preventable HAI (Healthcare Associated Infection). Workers also must understand the practical function of cleaning (no dust, no spots, no smudges, no smells all equals clean).


2. The cost of not performing their job as directed could cost the employer millions of dollars by way of lawsuits. Our patients enter our facilities worried about germs and about getting an infection. We can impact patient satisfaction by allaying those fears while communicating, “While I am here today, I am going to disinfect all the high touch surfaces in your room and then disinfect your restroom before I leave.”

The Hygiene Specialist can also impact HAI rates by doing a good job of providing a safe, clean and disinfected facility that could save their employer millions.


3. Train those who clean that there is a pattern for cleaning. That is, clean the room from top to bottom, and from the cleanest part of the room to the dirtiest, leaving the restroom for last. When cleaning the “patient zone” (the 3-foot area around the patient’s bed, including the bed rails), use a new, clean cloth. When done performing that task, ask the patient, “Is there anything I missed?”


4. Never double dip a cleaning cloth. Set up a clean bucket of properly diluted disinfectant at the beginning of the shift and then add 10 to 15 microfiber cloths to the solution. When it comes time to disinfect hard surfaces, merely reach into the bucket for a clean, disinfectant-charged cloth. Fold the cloth in half and then half again. As a surface is cleaned, unfold the cloth to the next unused portion. Keep doing this systematically until all eight sides have been used. A good microfiber will “catch micro-soils, but not release them."

Never return (double-dip) a soiled cloth into the clean solution because the disinfectant will become contaminated and less effective as time goes on. By utilizing this method, the same properly diluted disinfectant could last an entire 8-hour shift without having to be changed.


5. Using a quaternary ammonium disinfectant with retired cotton cleaning cloths (such as surgical towels, terry cloth towels and washcloths, T-shirt material) and cotton, string mops is counter-productive and dangerous. Unfortunately, this quat and cotton combination is used in most hospitals and hotels.

Cotton inactivates quat disinfectants by binding the active ingredients to the cotton rather than releasing them to the surface. This happens within 5 minutes of introducing cotton wipers or mops to the bucket of properly diluted quat disinfectant. In fact, you might as well be using water after 5 minutes because the ppm (parts per million) of active ingredients in the quat disinfectant is out of specification and in violation of US federal law.

Monday, May 13, 2013

Tips For Removing Gum and Adhesives from Carpets

This article was originally published in Clean Link.

Spring’s here, and that means many commercial facilities will be cleaning their carpeting. It also means that gum, adhesives, and similar soiling that found their way onto carpets now need to come out.

Removing this type of soiling can be a challenge. Even when it appears that gum or adhesives have been removed, they sometimes reappear a few days later. This is because some of the sticky residue remains in the carpet.

To remove gum and adhesive residue from carpets, read the following suggestions:
  • Scrape: Scrape off as much of the gum/adhesive as possible. Freezing the gum and “chipping” it off is also an option.
  • Heat: After scraping the matter from the carpet, a sticky residue usually remains. Often this can be removed with hot-water carpet extraction or steam vapor applied over an absorbent towel (the residue transfers to the towel).
  • Chemicals: Either a non-volatile dry solvent, a volatile dry solvent, or a gel solvent can be used to remove any remaining residue. Allow for dwell time, and then agitate the area using a scraper. This works the solvent into the residue. Rinse with hot water and detergent.
Other options include placing a paper towel directly on the adhesive. Then place a clean cloth over the paper towel and iron over it until all the adhesive is lifted onto the paper towel. Sometimes applying a cloth soaked in water and vinegar and placing it on the problem area overnight may also remove the adhesive.


Monday, April 22, 2013

Seven Tips To Cleaning Ceramic Flooring

This article was originally published in CleanLink.

Floor-covering trends come and go, but according to ISSA's Value of Cleaning white paper, ceramic flooring is becoming more and more popular in the United States. There are several good reasons behind this trend. Ceramic tile is:
  • Relatively inexpensive
  • Highly durable
  • Made from clay and sand, which are very sustainable materials
  • Available in a variety of glazes, colors, and designs
  • Relatively easy to clean and maintain
It is recommended that cleaning professionals follow the following tips when caring for ceramic floors:
  • Clean daily. It is often best to vacuum ceramic tiling using a backpack vacuum cleaner instead of sweeping; this is more effective and helps protect indoor air quality
  • When mopping, use a clean mop and bucket and a mild, all-purpose cleaner
  • When heavily soiled, these floors may need to be machine scrubbed
  • Use a wet/dry vacuum to extract solution and soils from flooring after scrubbing; this helps to prevent them from resettling on the floor

Monday, October 1, 2012

Top Ten Soils in Carpets Identified

This article was originally published in CleanLink News.

The key job of carpet cleaning is to remove soils from carpets. However, there are actually several different types of soils and contaminants found in carpets, and knowing what type of soil is in the carpet is frequently the first step in effectively removing it.

Because of this, this month's U.S. Products Carpet Cleaning Advisory focuses on the top ten soils that most often end up in carpets and how they got there in the first place.
  1. Sand, clay, and other "gritty" materials
  2. Natural fibers such as lint from clothing
  3. Gum
  4. Petroleum, oil, and grease
  5. Human hair and skin
  6. Dust mites, fleas, and other insects
  7. Organic soils and materials (minerals and soils from landscaping areas, for example)
  8. Airborne carbon and automotive exhaust
  9. Spilled food or beverages
  10. So-called "miscellaneous unknowns"
To tackle these soils, learn about various carpet cleaning solutions that are available to you.