The Missing Link: Are You Skipping a Step in Your Recoats?

This article was originally published in Hardwood Floors.

Recoating wood floors is a great option for finishes going through a midlife crisis. Quick and clean, it is still gaining in popularity and acceptance with homeowners. Those of us who have been in the industry for awhile have seen a noticeable spike in interest since a couple of manufacturers of waterborne finishes started promoting it, as they saw an expanding recoating market and started putting products out there to support it. These products include liquid cleaners, synthetic pads, test kits for acrylic waxes, auto scrubbers and bonding agents needed to prep an old finish and promote adhesion. The process has evolved dramatically over the last 10 years.

However, recoating has an identity problem that needs to be faced. Contractors, decorators, real estate agents, designers, etc., don’t talk about “recoating” a wood floor. They talk about “screen and recoat.” The term “screen” refers to using a screen-backed disc (worn, in most cases) to prep the floor prior to applying a fresh coat of finish. That’s an option if the finish is new. However, if the finish has years of use and layers of dirt and grime, just screening old finish without cleaning it first will increase the potential for problems and even failure. In essence, if all you’re doing is screening a floor without a deep cleaning prior to recoating, your chances for failure skyrocket.

Read the full article here to learn more about recoating wood floors. 

Tips to Speed Carpet Drying

This article was originally published in ICS.

The carpet cleaning season has finally arrived. And as most carpet cleaning technicians know, one of the most frequently asked questions about carpet cleaning right after it’s done is "How long will it take for the carpets to dry?"

Suggestions to help reduce carpet drying times include:

• Technicians should carry an assortment of air movers with them, including blowers, down draft systems, "whole room" dryers, stackable dryers, "kickstand" dryers, and angle adjustable fans.
• Proper wand technique is imperative - perform extra dry passes while "wanding," and be sure to overlap just-cleaned areas.
• Pull the wand back an extra few inches after closing off the solution flow; this will pick up any excess water left at the end of the wand stroke.
• Install air movers in each room as it is completed; move and add fans to each room as they are cleaned.
• Activate ceiling fans if present in the facility.

Clarke CarpetMaster® 100 Series Upright Vacuum

CarpetMaster® 12 inch and 15 inch single-motor upright vacuums deliver affordable quality along with a high level of cleaning performance with its exceptional dirt pick-up and filtration. A full complement of tools and user-friendly design features makes the CarpetMaster easy to use and maintain.